Is it possible to see the status of my heater?

Yes, you can check the status of your heater with using the duty cycle icon. The duty cycle icon, represented by the red-orange flame, is found in the top right-hand corner of each thermostat's card.

Screen_Shot_2018-02-09_at_2.43.25_PM.png

The duty cycle icon varies between four states:

Off  0%
1 flame 1 - 32%
2 flame 33-66%
3 flame 67-100%

As Mysa uses a proportional control algorithm to heat the room, the heat output of the heater, and therefore duty cycle icon, will decrease as the ambient air temperature reaches the desired setpoint temperature. 

Can’t find your answer in our support center? Contact us directly.